- "LOAD " / [L] Load data (BTM.LOAD)
Loads *.RCP / *.R36 data.
(Selecting this menu with [SHIFT] + [Enter], a data is stored above track 18.)
File selector will rise. You can select / enter file name (extension can be omitted) to edit. After selecting the file, the current path will move to data's path. - "SAVE " / [S] Save data (RCP.SAVE)
Saves *.R36 / *.RCP data.
File selector will rise. You can select / enter file name (extension can be omitted) to edit. After selecting the file, the current path will move to data's path. - "EDIT&SET" / [E] Track editor & track setting
Edits and configures each tracks. To configure a parameter, move the cursor to the place ,enter [Enter] and configure each parameters.
(Pressing [Enter] on parameters of "TR" or pressing [SHIFT] + [Enter] on any place will go to track editor.)
[Enter] Enters track editor / Configures parameters. "TR" Enters track editor. "MODE" Sets mode of play command.
Every [Enter] pressing change modes Play / Mute / Mix / Rec.Play This track will be played when recording. Mute This track won't be played when recording. Mix This track will be played when recording, and recorded data will be stored in this track.
(Recorded data will overwrite original data. Data mixing is not supported.)Rec This track won't be played when recording, and recorded data will be stored in this track. "CH." Specifies MIDI channel of this track.
You can set MIDI channel (A1 - A16, B1 - B16, 0 = OFF)
1 - 16 / A1 - A16 = MIDI PORT A ch.1 - 16
17 - 32 / B1 - B16 = MIDI PORT B ch.1 -16
"ST+" Specifies start timing of this track. (-99 to +99) "K#+" Specifies shifts of note number (-64 to +63, 128 = OFF) "RHY" Specifies whether this track is rhythm track or not.
(With this option 'ON', rhythm track editor can be enabled.)OFF Disables rhythm track editor ON Enables rhythm track editor (up mode) ON+ Enables rhythm track editor (down mode) "MEMO" Sets track memo (up to 36 chars) [SPACE] Sets the parameter OFF (CH. / ST+ / K#+ / RHY) [ = ] Negate the parameter (MODE / CH. / ST+ / K#+)
(CH.: toggles 'A' and 'B')
(MODE: toggles 'PLAY' and 'MUTE')
(RHY: toggles 'ON' and 'OFF')[ + ] Adds +1 to the parameter. (CH. / ST+ / K#+) [ - ] Decrements -1 to the parameter (CH. / ST+ / K#+) [ L ] Track file load Loads a track data (*.TRK).
Enter / select a track file data when file selector rise (Extensions can be omitted.).
After selecting the file, the current path will move to data's path.[ S ] Track file save. Saves a track data (*.TRK).
Enter / select a track file data when file selector rise (Extensions can be omitted.).
After selecting the file, the current path will move to data's path.[ X ] Exchanges the track data. Exchanges this track to other. Please select target track.
[ C ] Copies the track data Copies this track to other. Please select destination track.
[ M ] Mixes the track data Mixes the track data to other, and write the result to destination track. Please select the (mix) target track and (write) destination track.
Measures are taken up from first (source 1) track.
(All SAME MEAS / REPEAT of destination track will be extracted (excepts for 255/256 loops) .)
(This action uses copy buffer as work area, so the copy buffer will be cleared after the action done.)
[ B ] Rewrite measures in this track Please specify steps in a measure and offset (from the top of the track)
Offset can be used to specify the first measure that contains initializing data and it's steps doesn't reach to steps in a measure.
(All SAME MEAS / REPEAT of destination track will be extracted (excepts for 255/256 loops) .)
(This action uses copy buffer as work area, so the copy buffer will be cleared after the action done.)
[ O ] Optimize this track Optimizes Rest / PITCH / VOLUME / EXPRESS / tie data.
Confirm message will rise. Please answer [Y] or [N]
[CLR]/[D] Erase / Initialize this track Confirm message will rize. Please answer [Y] or [N]
[OPT.1]+[ A ] - [ Z ] Direct execution of options Executes commands in "OPTION" directly.
[TAB] Specifies track number directly (1 - 36) [R.UP]/[R.DW] Moves view point of tracks by 9 tracks. [XF1] Play [SHIFT]+[XF1] Play (point specified) [XF2] Track play [SHIFT]+[XF2] Track play (point specified) [XF3] Resume playing [XF4] Pause playing [XF5] Stop playing - "PLAY " / [P] Play (PANEL )
Plays the data.
- "RECORD " / [R] Real time recording (INP.TEST)
Enter realtime recording mode.
MIDI IN Monitor
First, track set mode will rise. You can set recording mode of each tracks.
To go record mode, enter [Enter] on a track number or [SHIFT] + [Enter] on any place.
If a track is configured as 'Rec' mode, the recording mode is single track recording mode. If multiple tracks are configured as 'Rec' mode, it will be multi track recording mode.
In single track recording mode, data of MIDI channel 1 will be recorded.
In multi track mode, each channels corresponding to each tracks in 'Rec' mode will be recorded.
Before starting recording, some parameters can be changed.
A recording will start when any input data come from MIDI IN or press [Enter] / [SPACE]. If started with pressing [Enter] / [SPACE], recording will wait 2 measure (with metronome counts).[ C ] Changes recording channel in single track mode (1 - 16). [ O ] Changes output mode (THRU / OFF) [ M ] Toggles metronome ON / OFF. [ F ] Configures recording filter. [ESC] Cancels recording.
Start / Stop of MIDI message (0xfa / 0xfc) also controls recording start / stop.
[ESC] stops current recording.
In recording, metronome will counts (The counts will come from specified channel in configuration file.).
Some parameters can be changed during recording.
Recorded data will stored in the track these were configured as REC / MIX mode.[ M ] Toggles metronome on / off. [R.UP] Increases the tempo. [R.DW] Decreases the tempo. [UNDO] Sets the tempo to original speed. [ESC] Stops the recording.
(Multi packet exclusive will fixed to one packet)
If "RECORD" is selected with [SHIFT] + [Enter], MIDI input test mode will rise.
In this mode, all data from MIDI IN will be displayed and redirected to MIDI OUT as is. (When playing any data, the playing will stop.)
[ C ] Converts MIDI channel and outputs Each inputs from MIDI IN will be redirected to specified MIDI channel
Please select MIDI channel (A1 - A16, B1 - B16, 0=THRU). If 0 is specified, the channel conversion will be canceled (MIDI THRU).[ G ] Outputs program change (It will only do when channel conversion specified)
Please choose tone from tone selector.[ESC] Return to main command menu - "FILTER " / [F] Recording filter
Specifies controllers that will be recorded.
If a controller configured as 'ON', it won't be recorded. - "TIME&KEY" / [K] Time & key setting
Configures some parameters like tempo, key, etc.
Move to any place and press [Enter].
[Enter] Configure a parameter. "TEMPO " Tempo
Configures tempo (8 - 250)."TIMEBASE" Timebase
Configures timebase of crotchet (48, 96, 192, 240, 480)"BEAT " Beat
Specifies the beat (it will be used beats of metronome in recording mode). (numerator / denominator)"PLAYBIAS" Play bias
Each notes in all track will be shifted with this parameter when playing (-36 to +36).
(excepts tracks with K#+ configured to 'OFF')"KEY " Key
Configures key
(If this parameter configured, sharp and flat will added to appropriate notes automatically in track editor.) MAJOR : Major scale
minor : Minor scale
[ 0 ] - [ 6 ] Configures numbers of sharps /flats. [ # ]/[ + ] The number denotes sharps. [ b ]/[ - ] The number denotes flats. [R.UP]/[R.DW] Changes keys by rotations. [SPACE] Toggles Major / Minor. [ + ] Increments the number of cursor position +1.
(TIMBASE / TEMPO / PLAYBIAS / KEY)[ - ] Decrements the number of cursor position -1.
(TIMBASE / TEMPO / PLAYBIAS / KEY)[ - ] Initialize the number of cursor position. - "TITLE " / [T] Title
Sets title (up to 64 chars)
- "MEMO " / [M] memo
Sets memo ( 28 x 12 chars )
(A window will rise.)
[Enter] Edit cursor line. [DEL] Delete cursor line (and store to delete buffer). [UNDO] Paste contents of delete buffer to cursor line. - "PART ASS" / [G] Part assign
Assigns tone list to each channel.
(Default list can be specified in configuration file.)
(This parameter will be stored in data)
[Enter] Changes tone list assign on cursor position.
Please choose tone list by selector.
[CLR] Initialize assigns by parameters in configuration file. - "RHY ASSI" / [A] Rhythm assign
Assigns 32 tone name to 32 key numbers in rhythm track editor (Default assigns can be specified in configuration file.).
After changing this assigns, all tracks that are configured "RHY" is "ON" in "TRK.SET" will be rewritten with new assigns.
[Enter] Changes parameter at cursor position
Keys can be specified either note name or key number (24 - 127). (Down cursor key will call key selector.)
Don't set same number to different assign (excepts for OFF (K#=0))[ + ] Increments parameter +1 at cursor position. [ - ] Decrements parameter -1 at cursor position. [CLR] Initialize all assigns by parameters in configuration file. [SPACE] Initialize a assign at cursor position by parameters in configuration file. [ X ] Updates all assign names. [ C ] Changes MIDI channel of sound test. (A1 - A16, B1 - B16,0 = off) [ G ] Changes program number of sound test.
If '-1' specified, program change won't be sent.[down cursor key] Calls tone selector. [UNDO] Sound test. (out to ch.A10 : default) [ R ] Sound test. (out to ch.A11 prog.64 : CM-64 + SN-U110-10 ROCK DRUMS) [ E ] Sound test. (out to ch.A11 prog.65 : CM-64+SN-U110-10 ELEC DRUMS) [ESC] Return to command menu. [ L ] Loads assign file (*.RAS)
Loads Rhythm Assign file.
Enter / select a track file data when file selector rise (Extensions can be omitted.).
[ S ] Saves assign file (*.RAS)
Saves Rhythm Assign file.
Enter / select a track file data when file selector rise (Extensions can be omitted.).
- "USER EXC" / [U] User defined exclusive
[Enter] Data add (hex) / set comment [ 0 ] - [ F ] Rewrite data (hex) [ + ]/[ > ] Increments the number of cursor position +1. [ - ]/[ < ] Decrements the number of cursor position -1. [SHIFT]+[ > ] Increments the number of cursor position +10. [SHIFT]+[ < ] Decrements the number of cursor position -10. [BS] Deletes a data at left of cursor position. [DEL] Deletes a data at cursor position. [INS] Toggles insert mode. [CLR] Initialize all data by parameters in configuration file. [SPACE] Initialize a data by parameters in configuration file. [F 8] Writes checksum of Roland / YAMAHA modules directly. [F 9] Loads all User Exclusive data from file (*.REX) [SHIFT]+[F 9] Loads a User Exclusive data from file (*.RES) [F10] Saves all User Exclusive data to file (*.REX) [SHIFT]+[F10] Saves a User Exclusive data to file (*.RES) Available commands in User Exclusive data. [F 1] gt : SEND GATE POSITION DATA
Sends value of GT at this point.[F 2] ve : SEND VELO POSITION DATA
Sends value of VEL at this point.[F 3] ch : SEND CHANNLE No.
Sends channel number of current track.[F 4] cs : CLEAR CHECK SUM
Clears check sum.
(To use ss, you must specify it.)[F 5] ss : SEND CHECK SUM
Sends check sum (Roland style), calculated from parameters after cs.[F 6] F7 : END OF EXCLUSIVE
End of exclusive. - "CM64 CON" / [C] CM-64 controller (only for CM-64)
It is only available on X68000
- "SC55 CON" / [SHIFT]+[C]
GS/GM controller (GE.x v0.12 by TAKA-P)
It is only available on X68000
- "UNIT SEL" / [D] Loads DEF file
Loads module definition table file (*.DEF).
Enter / select a track file data when file selector rise (Extensions can be omitted.).
If RCP / R36 filename has not been specified, user exclusive data will be set with parameters defined in configuration file.
- "OPTION " / [O] Execute external programs
Not supported.
- "INIT " / [I] Initialize
Initialize all data.
Confirmation message will rise. Please answer with [Y] or [N]. - "EXIT " / [X] Exit STed2 (Force exit)
Exit STed2.
Confirmation message will rise. Please answer with [Y] or [N]. (With [SHIFT] + [Enter], confirmation is skipped.)