Special controller

• Parameters for Special controllers
  
  

  Description	DATA1	DATA2	DATA3
  MIDI Channel Change	STEP TIME	CHANNEL NO.	---
  Change the channel for the track DATA2 = channel (A1 ... A16, B1 ... B16) 1 ... 16 / A1 ... A16 = MIDI PORT ch.1 ... ch.16 17 ... 32 / B1 ... B16 = RS-232C PORT ch.1 ... ch.16
  Program Change	STEP TIME	PROGRAM NO.	---
  Change the tone for the track DATA2 = Program number (0 ... 127) tone number
  Bank & program change	STEP TIME	PROGRAM NO.	BANK NO.
  Change the tone for the track PROGRAM and BANK (MSB) can be specified all at once. DATA2 = Program number (0 ... 127) tone number DATA3 = Bank number (0 ... 127) bank number (MSB)
  Control change	STEP TIME	CONTROL NO.	CONTROL VALUE
  DATA2 = Control number (0 ... 127) 1 Modulation 7 Volume 10 Panpot 11 Expression 64 Hold 1 (Damper pedal) 0 Bank select (MSB) 32 Bank select (LSB) 5 Portamento time 65 Portamento switch 84 Portamento control 66 Sostenute 67 Soft pedal 91 Effect1 (Reverb send level) 93 Effect 3 (Chorus send level) 94 Effect 4 (Delay send level) 6 Data entry (MSB) 38 Data entry (LSB) 98, 99 NRPN LSB, MSB 100,101 RPN LSB, MSB 120 All sound off 123 All note off 121 Reset all controllers DATA3 = Parameter (0 ... 127) Controller parameter
  Tempo change	STEP TIME	TEMPO	GRADATION
  Change the tempo of the data DATA2 TEMPO(1 ... 255) BPM / (initial_tempo * 64) DATA3 GRADATION(0 ... 255) Speed of gradation of tempo
  Channel after touch	STEP TIME	PARAMETER	---
  Polyphonic key pressure	STEP TIME	KEY NO.	PARAMETER
  Pitch bend	STEP TIME	PARAMETER	---
  DATA2 = Bend value (-8192 ... +8191) If note name is specified (instead of number), the difference between the note and the last note is calculated.
  Roland style exclusive: Device No. & Model ID	STEP TIME	DEVICE No.	MODEL ID
  Specifies the Device No. and Model ID. They are used all Roland style exclusives in the track. DATA2 = Device number (0 ... 127) Please specify UNIT_NUMBER -1. 16 (10H) is the default. DATA3 = Model ID (0 ... 127) 22 (16H) is the default. 22 (16H) CM-64 / CM-32x / MT-32 / D110 / D10 / D20 (default) 43 (2BH) U220 / U20 66(42H) GS format (SC-55 / SC-155 / CM-300 / CM-500 / etc ...) 69 (45H) SC-55 / SC-155 (DISPLAY)
  Roland style exclusive: Base address	STEP TIME	BASE AD.(high)	BASE AD.(low)
  Specifies upper two bytes of address of Roland style exclusive. DATA2 = highest byte of address (base address + offset) (0 ... 127) DATA3 = middle byte of address (base address + offset) (0 ... 127)
  Roland style exclusive: address & parameter	STEP TIME	OFFSET ADDRESS	PARAMETER
  Specifies lowest byte of address and a parameter of Roland style exclusive. DATA2 = lowest byte of address (base address+offset) (0 ... 127) DATA3 = parameter (0 ... 127) Please refer to the manuals of each MIDI modules for the detail of these address and parameter.
  MKS-7(Roland MKS-7 Exclusive)	Step	Parameter	Data
  DATA2 = Parameter Number (0 ... 127) DATA3 = Data (0 ... 127)
  FB-01 P (Parameter Change)	Step	Parameter	Data
  DATA2 = Configuration Parameter Number (0 ... 63) DATA3 = Data (0 ... 127)
  FB-01 S (System Parameter Change)	Step	Parameter	Data
  DATA2 = System Parameter Number(0 ... 127) DATA3 = Data (0 ... 127)

If a parameter is followed by 'H' or '$', it will be treated as hexadecimal.

[Enter] is treated as 'Y' in "Y / N"

Main screen
Parameters of track set data
Edit screen
Command menu
Selector
Editor
Special controller